When summer or scorching heat strikes with fury, a portable air conditioner could be the best way to make it through the hottest days. The unit helps you maintain a cold temperature in your home. The beautiful thing about it is that you can take advantage of the compact size to install it anywhere that catches your fancy.
Buying the air conditioner is one side of the coin; installing it is another. Indeed, the unit is a convenient alternative to the traditional/window-fitted air conditioners. So, installing shouldn’t pose a problem, provided you understand how to go about it.
We want to help you make the process seamless. So, read below to discover the step-by-step overview of installing your portable air conditioner without hassles.
- Choose the Location
You should decide on the area in the home where the unit would be placed. Ideally, you must ensure that it is about 12 inches away from obstructions like furniture. As a rule, you must ensure that the unit is not placed on a chair or shelf.
While choosing the location or where to place the portable air conditioner, you also have to ensure that the power cable is close to the outlet. After that, check if the necessary kits like a window slide connector and vent hose are part of the package in the unit.
If all these are in place, you can then proceed to the installation proper.
- Install the Window Kit
The first step is to install the window slide connector. This process depends on your expectations and the type of window you have.
For instance, you may need to trim down the kit if the opening on the window is smaller than that of the package. On the other hand, you would need to place the kit on one side and extend it to the height of the window. That is tenable if your window slides side-to-side.
- Connect the Hose
With the window slide connector securely installed, you can then proceed to the connection of the hose.
In this instance, you need to attach the vent hose to the back of the air conditioner. Check if there’s a connector on the AC. If there’s none, then you can install one before attaching the hose. Ensure that the vent hose is securely locked and should not extend beyond 9 feet.
- Plug Your Unit
You’re almost done. Now is the time to install your AC. If you haven’t gotten one or looking to buy one, then you may want to get the LG’s latest portable AC (see review on CoolAndPortable.com).
Now that you have the unit with you, the next step is to plug it into the power source. You must connect the unit into a properly grounded outlet.
Note that options like an extension cord or a power strip. They tend to bring down the efficiency of the AC and may trigger problems in the future.
The next step is to look for the indicator that shows that the unit is connected. Ideally, your portable air conditioner should have a small, indicator light that turns green when it is connected. Once confirmed, you can proceed to test-run the unit.
The plug housing the indicator light comes with the “TEST” and “RESET” buttons. So, press the TEST button to activate the built-in features of the AC. That also helps you determine potential problems in the power flow. After that, you can then press the RESET button to restore the settings before using the unit.
Final Words
The portable air conditioner helps you escape the scourges of the summer weather and other hotter days. You can check out the LG’s latest portable AC (see review on CoolAndPortable.com), which is famous for its excellent cooling system. Also, use the above tips to install the unit.